Flow Factor Sells Industrial Circulation Heaters

Circulation Heaters are inline heaters (Tankless Heaters) used in industrial or commercial applications where large volumns of fluids need to be heated. Our circulation heaterscan heat water, air, steam, or oils. Care have to be given to choosing the correct heater for the medium being heated and the controls chosen to give consisant output temperature and protection to the system. A system would include a heater, sensor and a power control device (SSR, Contactor or SCR). Our Circulation heaters are electric.

Flow Factor can provide Watlow, Chromalox, and Keltech inline (tankless) heaters for a myriad of heating applications from simple water heating to specialty gas heating to safety eye wash stations. Heaters can have wattages from 1kw to megawatt units.

**Circulation-Tankless-Inline-Heaters**
Watlow	Keltech	Chromalox

This newest edition to Watlow's CAST-X family of heaters consists of two helical coiled tubes and tubular elements cast into a robust aluminum body which serves as the heat transfer media between the tubular element and the process tubes. The use of heavy wall 316L seamless process tubing assures high reliability and high pressure operation. The CAST-X 3000 features a fluid path independent of the heater sheath preventing fluid contamination, an integrated thermostat housing allowing the heater to run dry and the dual tube construction allowing water flow rates to 20 GPM when run in parallel. Its non-welded construction minimizes potential leakage, allows high-pressure operation and is self-draining when mounted vertically.	Suitable for use in heating corrosive fluids such as de-ionized water. Available for a variety of applications in industrial processing. Can be used in parallel for increase in flow or temperature rise capabilities. Equipped with a fully modulating control Equipment protection ground fault available. Available in 480V 3-phase delta and 600V 3-phase delta configurations	Chromalox circulation heaters are packaged units consisting of a screwplug or flanged immersion heater mounted in a thermally insulated heating chamber for efficient heating of a flowing medium by in-line or side-arm operation. Thermocouple sensors can be provided to connect to most any controller. Select from many terminal enclosures, sheath and vessel materials, flanged connections, and controls.